Загрузить PDF [429 КБ]

CT 255/RU/ E
ÄÂÓÕÑÒÓÏÅÍ×ÀÒÛÉ
ÐÅÃÓËßÒÎÐ ÄÀÂËÅÍÈß
TWO STAGE PRESSURE REGULATOR
Secondo norma UNI CIG 8827
To UNI CIG 8827
FE
6 - 10 - 25 - 50
ÑÅÐÈÈ
SERIES
FE 6 -10 -25
B
A
FE 50
ÂÛÑÎÊÎÅ ÄÀÂËÅÍÈÅ
HIGH PRESSURE
ÑÐÅÄÍÅÅ ÄÀÂËÅÍÈÅ
MEDIUM PRESSURE
2
ÍÈÇÊÎÅ ÄÀÂËÅÍÈÅ
LOW PRESSURE
A
ÓÑÒÐÎÉÑÒÂÎ ÀÂÒÎÌÀÒÈ×ÅÑÊÎÃÎ ÑÁÐÎÑÀ
ANTI-RESET AUTOMATIQUE DEVICE
B
ÓÑÒÐÎÉÑÒÂÎ ÐÓ×ÍÎÃÎ ÑÁÐÎÑÀ
MANUAL RESET DEVICE
ÂÂÅÄÅÍÈÅ
INTRODUCTION
Äâóõñòóïåí÷àòûå ðåãóëÿòîðû äàâëåíèÿ ñåðèè FE
èìåþò îáøèðíóþ îáëàñòü ïðèìåíåíèÿ, êàê â
ïðîìûøëåííûõ, òàê è áûòîâûõ óñòàíîâêàõ.
Ýòè ðåãóëÿòîðû ( ðèñ. 1 è 2) ìîãóò óñòàíàâëèâàòüñÿ
íà ñ÷åò÷èêàõ ðàñõîäà ãàçà, à òàêæå è â äðóãèõ
ñëó÷àÿõ.
Îíè ìîãóò ïðèìåíÿòüñÿ äëÿ âñåõ íåàãðåññèâíûõ
ãàçîâ.
Ìîíòàæ - â ëþáîì ïîëîæåíèè, â ìåñòàõ çàùèùåííûõ îò ïîãîäíûõ óñëîâèé.
Âûïóñê èç ïðåäîõðàíèòåëüíî-ñáðîñíîãî êëàïàíà
ìîæåò áûòü âûâåäåí íàðóæó, åñëè êëàïàí
óñòàíîâëåí âíóòðè ïîìåùåíèÿ.
Áëàãîäàðÿ ðàçðàáîòêå ðåãóëÿòîðà ñ äâóìÿ
ñòóïåíÿìè ðåãóëèðîâàíèÿ ãàðàíòèðóåòñÿ :
- âûñîêàÿ òî÷íîñòü
- ïðîñòîòà îáñëóæèâàíèÿ.
The FE series two-stage pressure regulators have a
vast range of applications both in industrial and
domestic installations.
These regulators (figs. 1 and 2) have been designed
for direct installation on user meters or on multiple
users.
They are suitable for use with previously treated
non-aggressive gases.
They can be installed in any pasition in environments
or premises protected from the weather.
The relief discharge can be conveyed to the exterior
when installed indoors.
Thanks to the design with double balanced regulation stage, the following are assured:
- high accuracy
- high service reliability.
ÎÑÍÎÂÍÛÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
MAIN SPECIFICATIONS
- Äàâëåíèå íà âõîäå: 0,5...5 áàð
- Äàâëåíèå íà âûõîäå: 15...150 ìáàð
- Òåìïåðàòóðà îêð. ñðåäû: -20î...+60îÑ
äëÿ ìîäåëè FE U: -36î...+60îÑ
- Êëàññ ðåãóëèðîâàíèÿ RG: âïëîòü äî 5
- Êëàññ äàâëåíèÿ çàêðûòèÿ SG: âïëîòü äî 10
- Ðàçìåðû: FE 6, FE 10, FE 25, FE50
- ïðÿ Ïðèñîåäèíåíèå óãëîâîå (ìîäåëè FE S èëè FE T),
ïðÿìîå (ìîäåëè FE L)èëè ñíèçó (ìîäåëè FE U)
-
Inlet pressure range bpe: 0,5...5 bar
Outlet pressure Wh: Ö 15...150 mbar
Ambient temperature: -20o +60oC
Accuracy RG: up to 5
Closing pressure class SG: up to 10
Sizes available: FE 6, FE 10, FE 25, FE 50
Threaded connections with angle (FE models) or in
line (Fe...L models) fittings
Ðèñ. 1:FE 6 - 10 - 25
Ðèñ. 2:FE 50
ÌÀÒÅÐÈÀËÛ - MATERIALS
Êîðïóñ:
Àëþìèíèé CD ALSi 13Fe UNI 5079
Body:
die-cast aluminium GD AISi 13Fe UNI 5079
Ïîêðûòèå:
Öèíêîâàíèå GZnAL UNI 3717
Covers:
zinc alloy GZnAL UNI 3717
Øòóöåðû:
Ñòàëü/Ëàòóíü
Connection fittings:
steel/brass
Ñåäëî:
Ëàòóíü
Seal seat:
brass
Ìåìáðàíà:
Âóëêàíèçèðîâàííàÿ ðåçèíà
Diaphragm:
vulcanized rubber
Çàãëóøêè:
Íèòðîêàó÷óê
Seals:
nitrile rubber
3
ÂÛÁÎÐ
ÐÅÃÓËßÒÎÐÀ ÄÀÂËÅÍÈß
REGULATOR
SIZE SELECTION
Ðåãóëÿòîð äàâëåíèÿ âûáèðàåòñÿ íà îñíîâàíèè
íîìèíàëüíîãî ðàñõîäà ãàçà è äàâëåíèÿ, êîòîðîå
îí äîëæåí ïîääåðæèâàòü.
Èìåþòñÿ ñëåäóþùèå ìîäåëè:
FE 6
6 íì3/÷àñ*
FE 10
10 íì3/÷àñ*
FE 25
25 íì3/÷àñ*
FE 50
50 íì3/÷àñ*
* ( ðàñõîä ãàçà îòíîñèòñÿ ê ïðèðîäíîìó ãàçó
ñ îòíîñèòåëüíîé ïëîòíîñòüþ 0,61).
Ðåãóëÿòîðû FE ìîãóò òàêæå èñïîëüçîâàòüñÿ ïðè
áîëåå íèçêèõ äàâëåíèÿõ íà âõîäå, ÷åì îïèñàííûå
âûøå, îäíàêî â ýòîì ñëó÷àå âîçìîæíîñòè
ðåãóëÿòîðà íèæå.
The pressure regulator is selected by referring to the
nominal flow rate which the regulator itself can supply.
The following models are available:
FE6
6 Stm/h*
FE10 10 Stm/h*
FE25 25 Stm/h*
FE50 50 Stm/h*
* (capacity referred to natural gas with a density of
0.61).
The FE regulators can also be used with inlet pressures lower than those specified; in this case the
capacity of the regulator is lower than the values
specified above.
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÓÑÒÐÎÉÑÒÂÀ
SAFETY DEVICES AND ACCESSORIES
Ê ðåãóëÿòîðàì FE ïîñòàâëÿþòñÿ ñëåäóþùèå
ïðèíàäëåæíîñòè:
- âñòðîåííûé ôèëüòð íà âõîäå â ðåãóëÿòîð,
óäåðæèâàþùèé òâåðäûå ïðèìåñè, êîòîðûå
ìîãëè áû ïîâðåäèòü ñåäëî êëàïàíà
çàùèòà îò ïîâûøåíèÿ äàâëåíèÿ: ýòîò ïðèáîð
- ïåðåêðûâàåò ðàñõîä ãàçà, åñëè äàâëåíèå çà
ðåãóëÿòîðîì ïðåâûøàåò óñòàíîâëåííîå
çíà÷åíèå
çàùèòà îò ïîíèæåíèÿ äàâëåíèÿ: (òîëüêî
- äëÿ FE 50) ýòîò ïðèáîð ïåðåêðûâàåò ðàñõîä
ãàçà, åñëè äàâëåíèå çà ðåãóëÿòîðîì ñòàíåò
íèæå 85% îò óñòàíîâëåííîãî çíà÷åíèÿ
- çàùèòà îò ïðåâûøåíèÿ ðàñõîäà ãàçà: ïðèáîð
ïðåðûâàåò ðàñõîä ãàçà, åñëè îí ïðåâûøàåò
140% îò íîìèíàëüíîãî çíà÷åíèÿ
- çàùèòà îò ñáîåâ ïîäà÷è ãàçà: ïðèáîð
ïðåêðàùàåò ïîäà÷ó ãàçà, åñëè èìåþòñÿ
ïåðåáîè âî âõîäíîé ëèíèè ðåãóëÿòîðà
- ïðåäîõðàíèòåëüíî-ñáðîñíîé êëàïàí:
ïðèáîð ñáðàñûâàåò íåêîòîðîå êîëè÷åñòâî
ãàçà, åñëè äàâëåíèå çà ðåãóëÿòîðîì
âîçðàñòàåò, íàïðèìåð, èç-çà ïîâûøåíèÿ òåìïåðàòóðû èëè ïðåêðàùåíèÿ
ðàñõîäà ãàçà
- ïðîòèâîñáðàñûâàþùåå óñòðîéñòâî
(òîëüêî äëÿ FE 6, 10 è 25): ýòî óñòðîéñòâî óñòàíàâëèâàåòñÿ ïî çàêàçó, ÷òîáû
â ñëó÷àå ïðåâûøåíèÿ äàâëåíèÿ çà
ðåãóëÿòîðîì íàä äàâëåíèåì ïåðåä
ðåãóëÿòîðîì, ðåãóëÿòîð íå âêëþ÷èëñÿ â
ðàáîòó.
Ðàáîòà ïðåäîõðàíèòåëüíûõ óñòðîéñòâ
ìîæåò áûòü ïðåêðàùåíà òîëüêî
âðó÷íóþ.
The FE pressure regulators are fitted with the following
devices:
- incorporated filter at the regulator inlet in drawn
sheet metal; this withholds solid impurities which
could damage the seal seat
- over pressure slam- shut : this can be set and it
blocks the supply if the downstream pressure rises
above the set point of the slam-shut itself
- under pressure slam- shut : the setting is fixed (to be
setted for FE 50); it blocks the supply if the downstream pressure drops below 85% of the set-point of
the regulator
- slam- shut for over flow : the setting is fixed; it blocks
the supply if the flow rate supplied reaches values
greater than about 85% of the set-point of the regulator
- slam- shut for over flow : the setting is fixed; it blocks
the supply if the flow rate supplied reaches values
greater than about 140% of the nominal value
- slam- shut for feeding failure : the setting is fixed; it
blocks the gas supply if the feeding line upstream
fauls
- relief valve: can be set; this releases small quantities
of gas if there are overpressures downstream from
the regulator due, for example, to increases in the
temperature of the gas when flow is zero
- anti reset device (for FE 6, 10, 25 only): this device,
installed upon request, is designed to avoid that
regulator can be put in service by a pressure source
from downstream side after slam shuts for over flow
or under pressure have tripped.
The slam- shuts can only be reset manually.
ÇÀÊÀÇ ÐÅÃÓËßÒÎÐÀ
ORDERING DESCRIPTION
Ïðè çàêàçå íåîáõîäèìî óêàçàòü:
- ðàçìåð ðåãóëÿòîðà è òèï ïðèñîåäèíåíèÿ
- òèï ãàçà
- äàâëåíèå çà ðåãóëÿòîðîì
- äàâëåíèå ñðàáàòûâàíèÿ ÏÑÊ
- âåðõíåå äàâëåíèå ñðàáàòûâàíèÿ ÏÇÊ
Following description for ordering is recommended:
- pressure regulator FE-size and kind of connections,
- type of gas,
- downstream pressure required,
- setting of relief valve,
- setting of over pressure slam shut.
4
ÃÀÁÀÐÈÒÍÛÅ ÐÀÇÌÅÐÛ - OVERALL DIMENSIONS in mm.
FE 6 -10 -25
FE/L - ËÈÍÅÉÍÛÉ -IN LINE
FE - ÓÃËÎÂÎÉ - ANGLE POSITION
110
100
100
1"G
1"G
3/4G
60/73*
155
55
80
1"1/4G
100
* Per connessione tipo Italgas
FE 50
∅ 146
145
1"1/2 G
1"G
75
1"1/2 G
77,5
93
73
170
5
125
CT 255/RU/E
Ïðèâåäåííûå äàííûå íå ÿâëÿþòñÿ îêîí÷àòåëüíûìè. Ôèðìà îñòàâëÿåò çà ñîáîé ïðàâî íà èçìåíåíèÿ áåç ïðåäâàðèòåëüíîãî îïîâåùåíèÿ.
The data are not binding. We reserve the right to make modification without prior notice.
Pietr o Fiorenti ni S.p.A.
I-20124 MILANO
I-36057 ARCUGNANO (VI)
I-80142 NAPOLI
Italy - Via Rosellini, 1 - Phone +39.02.6961421 (10 linee a.r.) - Telefax +39.02.6880457
E-mail: sales@fiorentini.com
Italy - Via E. Fermi, 8/10 - Phone +39.0444.968511 (10 linee a.r.) - Telefax +39.0444.960468
E-mail: arcugnano@fiorentini.com
Italy - Via B. Brin, 69 - Phone +39.081.5544308 - +39.081.5537201 - Telefax +39.081.5544568
ASSISTENZA POST-VENDITA E SERVIZIO RICAMBI: - SPARE PARTS AND AFTER-SALES SERVICE:
I-36057 ARCUGNANO (VI) - Italy - Via E. Fermi, 8/10 - Phone +39.0444.968511 (10 linee a.r.) - Telefax +39.0444.968513 - E-mail: service@fiorentini.com
Edigraf srl • 03/2000
UFFICI COMMERCIALI: - OFFICES: