*************************************************************** VPanel for DWX *************************************************************** WELCOME TO VPanel for DWX! We recommend that you first read through this document to obtain a better understanding of VPanel for DWX. This document provides an overview of the programs and their system requirements. The explanations here assume that you are already familiar with using in Windows. For further information about using Windows, please refer the user's manual from Microsoft Corp. If you are reading this file with Notepad, then go to the Edit menu and click "WordWrap" to select word-wrapping and make the displayed text easier to read. Table of Contents 1. Summary 2. System requirements 3. Supported Models 4. Installation * "Windows(R)" is registered trademark or trademark of Microsoft(R) Corporation in the United States and/or other countries. (C) 2017 Roland DG Corporation R3-180525 ======================================================== 1. Summary ======================================================== VPanel for DWX is a control program for operating and making settings for modeling machines from Roland DG Corp. It displays current information about the modeling machine on a computer screen in real time. This program is integrated with the modeling machine. You should always run it when you use the modeling machine. ======================================================== 2. System requirements ======================================================== - Microsoft(R) Windows 7, Windows 8.1 or Windows 10 operating system * As this software is a 32-bit application, it runs on WOW64 (or Windows-On-Windows 64) under the 64-bit version of Windows. - The minimum required CPU for the operating system - The minimum amount of required RAM for the operating system - 20 Mbytes or more of free hard disk space for installation - 256-color video card with a resolution of 1024 x 768 ======================================================== 3. Supported Models ======================================================== DWX-52DC DWX-52D DWX-52DCi DWX-42W ======================================================== 4. Installation ======================================================== To install the VPanel for DWX, please follow the procedures described below. You cannot run the VPanel directly from this installation disk. -------------------- - How to install If the VPanel is already installed, exit the VPanel before installing. You can exit the VPanel by right-clicking the [VPanel] icon in the tasktray, and click [Exit]. Please confirm that the [VPanel] icon is not displayed in the tasktray. - Installing the program from CD-ROM Follow the instructions on the setup menu on the CD-ROM to install and set up. ======================================================== If you have questions or problems, please contact your local vendor or Roland sales center.